LX-DD10 food box and tray stacker

Structural features:
main Transmission is controlled by PLC
Meal boxes and trays are stacked and transported by counting
After counting and stacking with photoelectric switches, remove the stacked products after reaching a certain quantity
Tray delivery is carried by chains or synchronous belts

Category:

Product

Message

Products

Tel:+86-18368787370

E-mial:hermanfang@wzleadwing.com

Product Description

Structural features:

main Transmission is controlled by PLC
Meal boxes and trays are stacked and transported by counting
After counting and stacking with photoelectric switches, remove the stacked products after reaching a certain quantity
Tray delivery is carried by chains or synchronous belts

Main technical parameters：

Power supply: AC220V 50HZ two-phase three wire system power supply	Dimensions: 1320X1050X900mm (length x width x height)
Maximum power: 4.5KW	Noise: not exceeding 30dB
Production capacity: ≤ 10 stacks/minute	Compressed air: pressure 0.6-0.9MPa
Flow rate of 0.67-0.9 cubic meters per hour
Model 1 Size: Maximum tray size 470 × 335 × 95 (length X width X height) Minimum tray size 350 × 275 × 90 (length X width X height)
Model 2 size: Maximum tray size 325 × 270 × 70 (length X width X height) Minimum tray size 220 × 220 × 45 (length X width X height)
Model 3 dimensions: Maximum tray size 225 × 115 × 60 (length X width X height) Minimum tray size 190 × 230 × 50 (length X width X height)
Model 4 Dimensions: Maximum Tray Diameter ∅ 300 × 45 (mm) Minimum Tray Diameter ∅ 200 × 20 (mm)
Environmental temperature: 25 ± 10 ℃	Whole machine weight: approximately 350KW
Note: This product is suitable for the above four products and can be customized according to needs.

Key words:

LX-DD10 food box and tray stacker

Related Products

LX-ZX-5 Drop Packing Machine

Structural features:
1. Vertical automatic unboxing and bottom sealing
2. The feeding part adopts a free fall feeding method
3. The sealing method adopts a tape upper and lower sealing structure
4. The sealing tongue adopts pneumatic structure

LX-ZX5 Grabbing Packing Machine

Structural features:
1. Vertical automatic unboxing and bottom sealing
2. The feeding part adopts the suction method for feeding
3. The sealing method adopts a tape upper and lower sealing structure
4. The sealing tongue adopts pneumatic structure

LX-ZX6 Side Push Opening, Installing, and Sealing Integrated Machine

Structural features:
1. The transmission part adopts full servo control
2. The suction box adopts a combination of 90 degree vertical suction and side suction
3. The pushing part adopts the left and right holding type side pushing method
4. The cardboard conveyor belt adopts a servo supply belt adjustment method
5. Equipped with an automatic feeding device and a box flipping conveyor
6. Integrated function of sealing the box with tape and spraying glue

LX-R5 automatic five axis cling film rewinding machine

Structural features：
The whole machine adopts full servo drive PLC control
Various types of cling film for rewinding materials
Take out the roll conveyor table, which can automatically attach the head label

Welcome your message consultation

Any questions? Keep in touch. We 'd love to hear from you.